User Manual

Select Mode 
In Select Mode, the Multifunction buttons are used to select tracks for viewing & editing; to select
pages within those tracks; and for enabling/disabling various track display and performance options.
Note: Steppy can be in both Select mode ( yellow LED) and Edit mode ( red LED) simultaneously. If
you’re currently in Edit Mode (discussed later), you can enter Select mode to select which track you
wish to edit.
[1] SELECT button
Press this button to put Steppy into Select Mode. The yellow LED next to the SELECT button
turns on when Select Mode is on. In Select Mode, the labels with the black backgrounds
correspond to the buttons’ functions (matching the black color of the SELECT button).
If pressed and released, the SELECT button functions as a toggle button — putting Steppy into
Select Mode, where it remains until the SELECT button is pressed again to exit Select Mode.
If pressed and held, the SELECT button functions as a momentary switch — temporarily putting
Steppy into Select Mode while you press the desired Multifunction button. Releasing both the
SELECT button and the Multifunction button automatically exits Select Mode. This is great if you
want to make quick on-the-fly changes. For example, if you’re currently viewing Track A and you
want to view Track B, simply press and hold the SELECT [1] button while pressing the
TRACK B [2] button. Release both buttons and Steppy returns to Play mode (which will now be
showing the pattern for Track B) without remaining in Select mode.
Steppy 1U Manual 16