User Manual

Once connected, the cabling between the module and power supply should resemble the picture
below:
Before reconnecting power and
turning on your modular system,
double check that the ribbon cable
is fully seated on both ends and that
all the pins are correctly aligned. If
the pins are misaligned in any
direction or the ribbon is backwards
you can cause damage to your
module, power supply, or other
modules.
After you have confirmed all the
connections, you can reconnect the
power cable and turn on your
modular system. You should
immediately check that all your modules have powered on and are functioning correctly. If you
notice any anomalies, turn your system off right away and check your cabling again for mistakes.
 
Quadratt 1U Manual 5