User Manual

[3] MULT A
The first of two (62HP) or three (104HP) built-in 1 x 4 buffered signal multipliers. Plug an audio or
CV signal into the left-most jack and a buffered duplicate of that signal appears at the four jacks to
its right.
To the left of the MULT’s input jack is an LED, whose brightness indicates the amount of voltage
appearing at the input, and whose color indicates the polarity (with green signifying positive
voltages, and red signifying negative).
For more information about Buff Mults, see Understanding Buff Mults .
[4] MULT B
The second built-in 1 x 4 buffered signal multiplier. Plug an audio or CV signal into MULT B’s
left-most jack, and a buffered duplicate of that signal appears at the four jacks to its right.
MULT A is normalled to MULT B. So if nothing is plugged into MULT B’s input, then MULT A’s input
is duplicated across all 8 of MULT A & B’s outputs, making the two MULTS act as a single 1 x 8
buffered signal multiplier.
[5] MULT C (104HP Only)
Available only on the 104HP case, this is a third built-in 1 x 4 buffered signal multiplier. Plug an
audio or CV signal into MULT C’s left-most jack, and a buffered duplicate of that signal appears at
the four jacks to its right.
MULT B is normalled to MULT C. So if nothing is plugged into MULT C’s input, then MULT B’s input
is duplicated across all 8 of MULT B & C’s outputs. Also, if nothing is plugged into MULT B’s input,
then the signal appearing at MULT A’s input is duplicated across all 12 MULT outs.
[6] SUM A (104HP Only)
Available only on the 104HP case, this is a summing module that adds two voltages together. Plug
an audio or CV signal into SUM A’s left-most jack, and a second audio or CV signal into SUM A’s
other input jack, and a sum of the two signals appears at its output.
MULT C is normalled to the left-most input of SUM A. So if nothing is plugged into SUM A’s left-most
input, then the signal appearing at MULT C’s input is automatically sent into SUM A.
[7] SUM B (104HP Only)
Available only on the 104HP case, this is a second summing module that adds two voltages
together. Plug an audio or CV signal into SUM B’s left-most jack, and a second audio or CV signal
into SUM B’s other input jack, and a sum of the two signals appears at its output.
SUM A is normalled to the left-most input of SUM B. So if nothing is plugged into SUM B’s left-most
input, then the signal appearing at the output of SUM A is automatically sent into SUM B.
Palette Cases Manual 5