User Manual

● Pedal I/O 1U : Connect the 3-wire link cable between the Link Connector on the Palette and the
one on your Pedal I/O.
In this scenario, unbalanced audio is sent
out Audio Jack 1 (or 3) to your external
signal processor, and unbalanced audio
comes back from your external signal
processor into Audio Jack 2 (or 4).
IMPORTANT : If you connect a module to the Links Connector, you should not connect a module to
the same audio pair’s Audio Jacks Connector (described previously), or unexpected results may
occur.
[E] 5V Connectors
Connect these 5V connectors to any modules that require a 5V power source. You can also use this
to power an Intellijel USB Power 1U module, which (for example) is useful for connecting a small
USB gooseneck LED light.
 
Palette Cases Manual 12