User Manual

● Stereo Line In 1U : Using the cable
provided with your Stereo Line In 1U
module, connect it to the Audio Jacks
Connector (or to one of the two Audio
Jacks Connectors on the 104HP
case). Once connected, the
corresponding pair of Palette’s TRS
audio jacks function as L/R audio
inputs for the Palette case.
IMPORTANT : If you connect a module to the Audio Jacks Connector, you should not connect a
module to the same audio pair’s Link Connector (described later), or unexpected results may occur.
[C] MIDI Connector
Connect this 10-pin connector to your Intellijel MIDI 1U or µMIDI 1U modules using the cable
included with your MIDI module. This allows you to use the Pallete’s USB MIDI or ⅛” TRS MIDI
Jack(s) for connecting your eurorack system to standard MIDI gear.
Palette Cases Manual 10