User Manual

Using an Octalink 1U With a Doepfer A-180-9 
Octalink 1U is compatible with
Doepfer’s A-180-9 Multicore
module. If an Octalink 1U is
connected to the top (1-8) RJ45
port on the A-180-9, then the
numbered jacks correspond
perfectly. That is, jack 1 on the
A-180-9 connects to jack 1 on
the Octalink 1U; jack 2
connects to jack 2 , and so on.
Connecting the Doepfer’s
bottom (A-F) RJ45 port to an
Octalink 1U is also possible,
though this A-180-9 port
supports only six jacks, and
thus works only with the first six
jacks on the Octalink 1U. Note,
in this illustration, the
criss-cross manner in which
numbered Octalink 1U jacks map to the lettered ports on the A-180-9.
TECHNICAL SPECIFICATIONS 
WIDTH: 14 hp
MAXIMUM DEPTH: 14 mm
CURRENT DRAW: None (passive module)
Octalink 1U Manual 6