User Guide

Pitch Bend Range NOTE: Does not appear if Type = ”Drum”.
(1 - 24) Sets the max number of semitones that an incoming
MIDI Pitch Bend message will affect the PITCH output.
Coarse Tuning NOTE: Does not appear if Type = ”Drum”.
(± 24) Changes overall coarse tuning (in semitones) of the
MIDI channel. This is particularly useful for shifting
octaves, and placing 0V at the desired octave (i.e. C0,
C1, etc).
Trigger Length (5 - 100ms) Sets the amount of time that the channel’s trigger
signal stays ‘high.’ The factory default is 5ms.
MIDI 1U System Manual 34