User Guide

Clock (Running) As with “Clock (Always),” the jack outputs a divided clock
signal, but only when the transport is “running.”
NOTE: If you assign the output to “Clock” (either “Always” or
“Running”), then you have the option of setting an arbitrary
number of clock divisions (from 1 to 192), rather than the
preset options offered by the module’s dedicated CLK output.
Reset The jack transmits a trigger signal whenever a MIDI RESET
or START message is received.
Run The jack transmits a run gate that goes high (5V) on a MIDI
START/CONTINUE message, and goes low (0V) when a
STOP message is received.
CC Number The jack outputs a control voltage derived from the MIDI CC #
selected in the CC Number menu on the MIDI Channel
assigned to synth 1 . Voltage polarity is selected by the
CV Polarity parameter.
CC Number
(High Res) The jack outputs a control voltage derived from the High Res
MIDI CC # selected in the CC Number menu on the
MIDI Channel assigned to synth 1 . Voltage polarity is
selected in the CV Polarity menu. This allows fine-control of
voltages from any external DAW or MIDI Device capable of
transmitting them.
NOTE: Ableton Live users who wish to take advantage of
MIDI 1U’s 14-bit control capabilities can download Intellijel’s
free “High-Res CC” Max for Live plugin from the Intellijel
website, which is included in the Intellijel Config application
download.
Pressure
(Aftertouch) The jack outputs a voltage derived from Channel Aftertouch
on the MIDI Channel assigned to synth 1 .
Pitch The jack outputs a 1V/oct pitch output with a range of ±5V.
The actual pitch is determined by the note value received on
the MIDI Channel assigned to synth 1 , plus any additional
pitch bend.
Gate The jack outputs a gate signal, which is high (5V) for as long
as a note is being held on the MIDI Channel assigned to
synth 1 .
Trigger The jack outputs a +5V trigger signal whenever a MIDI Note
On message is received on the MIDI Channel assigned to
synth 1 . By default, the Trigger length is 5ms, but you can
override this, per-channel, using the Trigger Length option
for synth 1 .
MIDI 1U System Manual 29