User Guide

Global/Transport Settings
Use these settings to configure the MIDI 1U Clock and RST jack functions. Specifically:
Module Mode The MIDI 1U module works in one of two modes : Single or
Dual. Use this menu to select between the two operations.
Single Mono This is the default (and
most basic) mode of
operation, and is the
mode indicated by the
panel graphics. Single
mode uses only a
single, monophonic
synth ( synth 1 ) as
configured in the
Synths Column , which
responds to MIDI
commands on the
assigned MIDI
channel. Incoming MIDI data on that channel is analyzed and
converted to control voltages, which are sent out the
correspondingly labeled jacks.
Dual Mono This is an alternate,
dual-synthesizer mode
that allows a single
MIDI 1U module to
control two separate
monophonic synths
( synth 1 and synth 2 )
as configured in the
Synths Column ). In
this mode, you have
independent MIDI
control of the pitch,
gate and velocity for
two entirely different
synths — each of which can respond to its own MIDI
channels. When Dual Mode is selected, the MOD , CC and
TRIG jacks are repurposed as PITCH , VEL and GATE jacks
for synth 2 .
MIDI 1U System Manual 27