User Guide

System Region
On the far left is the red System Region, which is used to select
and connect to the desired MIDI 1U system, and to export and
import various saved settings. The following options are
available:
MIDI Input Select the MIDI Device you want to
configure from the drop down MIDI Input
list.
MIDI Output Select the MIDI Device you want to
configure from the drop down MIDI
Output list.
NOTE: To enable bidirectional
communication between the computer
and your MIDI 1U system, you must
select the MIDI 1U in both the
MIDI Input and MIDI Output menus .
Connect /
Disconnect Click this button to connect to the device selected in the MIDI Input &
MIDI Output menus. Once connected, the button becomes a Disconnect
button.
Refresh Devices With the Intellijel Config app disconnected from any devices, click this to
refresh the list of available MIDI devices supplied to the MIDI Input and
MIDI Output columns.
Update from Device Click to query the device. This is handy if, for example, you use the
MIDI 1U’s LEARN button to configure it while connected to the Intellijel
Config app. The Update from Device button repopulates the
Intellijel Config app with the latest settings from the device.
Import Click this button to import (load) a different MIDI 1U .xml format system
configuration from disc. System configurations can be saved to disc via the
Export button.
NOTE: You cannot import an XML file that was saved with a different
number of expander modules than you currently have.
Export Click this button to export (save) the current MIDI 1U system configuration
as a .xml file on your computer. The ability to export MIDI system
configurations is particularly useful when working with large,
MIDI-integrated eurorack systems, since it enables you to save and recall
different complex routings.
Reset Settings
To Defaults Click this button to reset the entire MIDI 1U system (including any
connected CVx modules) to the factory default settings.
MIDI 1U System Manual 25