User Guide

CVx 1U FRONT PANEL
Each of the optional CVx 1U expander
modules has eight user-assignable outputs.
Using the Intellijel Config app, you can assign
each of the eight jacks to generate just about
any type of voltage that can be derived from a
MIDI signal.
You connect a CVx expander module to the
MIDI 1U using their 6-pin I2C connectors, as
discussed in Connecting a CVx to a MIDI 1U .
You can chain up to four CVx modules to a
single MIDI 1U using their I2c connectors, as discussed in Connecting Multiple CVx Modules to a
MIDI 1U .
Connecting one or more CVx modules to a MIDI 1U increases its synth count from 2 synths (on two
MIDI channels) to 10 synths (on 10 MIDI channels).
There are 8 user-configurable output jacks on each CVx — each with its own status LED. To
configure these jacks requires use of the Intellijel Config app, discussed later in the manual.
MIDI 1U System Manual 23