User Guide

MIDI 1U FRONT PANEL
Controls
[1] LEARN button - Use this button to learn
which MIDI channel the MIDI 1U will
respond to, as well as the MIDI CC
numbers assigned to both the CC [F] and
MOD [E] output jacks.
MIDI 1U automatically saves all learned
settings ( CLK ÷ button flashes green )
after 2 seconds of MIDI inactivity,
ensuring it returns to exactly the same
state after a power cycle.
Pressing the LEARN button cycles through three states:
OFF : When the button is off, MIDI 1U is in normal operation and works to convert incoming
MIDI data into CV for your eurorack system.
SOLID BLUE : Indicates the MIDI 1U is in LEARN CC+CH mode, meaning the module is
awaiting a MIDI message, and that it will use the first message it receives to set both the
synth 1 MIDI Channel, and its CC [F] jack assignment.
FLASHING BLUE : Indicates the MIDI 1U is in LEARN MOD+CH mode, meaning the
module is awaiting a MIDI message, and that it will use the first message it receives to set
both the synth 1 MIDI Channel, and its MOD [E] jack assignment.
For more information about using the LEARN button, see Configuring MIDI 1U Using the Front
Panel , later in this manual.
Alternatively, you can set the MIDI channel, MOD, and CC jack assignments using the Intellijel
Config app, discussed later.
DUAL MODE: MIDI 1U offers an alternate, dual channel mode that reconfigures the jacks for
dual synth (2-channel) operation. In this mode, you have independent MIDI control of the pitch,
gate and velocity for two different MIDI channels. See Dual Mode for detailed information about
enabling the mode, and using the LEARN button within it.
MIDI 1U System Manual 14