User guide
27
Version
This manual is for version 1.03 of the module’s rmware.
To determine the rmware version, press the QUANT., INT.SYNC., LFO (twice), CHORD MODE, and PERC. MODE
buons, so that their (six) corresponding LEDs light up (note that you want to have both of the LFO 1 and 2 LEDs
light up). When this is accomplished, the LCD screen will alternate between displaying “shapsh/ver 1.03”, some
Japanese characters, and “CYLONIX/intllijel”. If there is no “shapsh/ver 1.03” (or other version display) then
your module has the original (ver 1.00) rmware. Note that a display of “ver 1.1” actually indicates version 1.01.
Please refer to Appendix C of this manual for instrucons on updang the module’s rmware.
Version 1.03
• Added: 4 new MODA desnaons, swapping Osc2 by Osc1 in the Phase, Combo, and Shape desnaons,
and swapping the Carrier and Modulator in the vocoder.
• Changed: The modulaon range for the Phase modulaon (by MODA) and the Tilt funcon (internal self-
phase modulaon of Osc1) has been increased 4-fold.
• Fixed: In version 1.01 and version 1.02 the Shape1 and Shape2 parameters were coarsely quanzed when
Morphing between panel and preset sengs in Preset Morph mode. The Shape parameters now smoothly
morph between sengs.
• Fixed: The pitch of oscillator 2 increased when changing the Mul mode with QUANT turned on. The pitch
now remains constant over all mul modes.
Version 1.02
• Added: Users can now choose between just intonaon or equal temperament tunings in chord mode.
• Added: Holdsync mode has been changed to do holdsync for osc1 and oneshot for osc2.
• Added: A conrmaon message is now displayed when a preset is loaded.
Version 1.01
• Added: The version number of the rmware is now displayed when entering the SplashScreen display.
• Fixed: In version 1.00 there were small disconnuies in the waveforms when the Shape1 and Shape2 pa-
rameters were rapidly modulated. These have been eliminated.
Changelog