User Manual

Inputs & Outputs
[1] CV A IN - The voltage patched in here controls the level of
VCA A. Patching a +5 V input into this jack (with the CV A
Attenuator [C] fully clockwise, the VCA A LEVEL [A]
slider all the way down, and the BOOST A [E] switch in the
center “0” position) results in approximately unity (1:1)
gain, which is sent to OUT A [5] .
[2] CV B IN - The CV input for controlling the level of VCA B. If
nothing is connected to this jack, the CV is taken from
CV A [1] .
[3] IN A - The input to VCA A.
[4] IN B - The input to VCA B. If nothing is connected to this
jack, the input is taken from IN A [3] .
[5] OUT A - The output of VCA A. If nothing is connected to
this jack, the output is mixed into OUT B [6] .
[6] OUT B - The output of VCA B. If nothing is connected to
OUT A [5] , this jack contains the sum of VCA OUT A and
VCA OUT B.
Amps Manual 9