User Manual

CHAINING AMPS
Multiple AMPS modules can be chained together to create a larger, multichannel ‘automatable’
VCA/mixer. To do so:
1. As shown in the illustration below, connect the CHAIN OUT connector on the back of the first
AMPS to the CHAIN IN connector on the back of the second AMPS (using the supplied 4-wire
cable).
When you chain two AMPS modules, it
functions exactly as if you owned a
4-channel, 12 hp version of AMPS (as
illustrated to the right).
That is, OUT B of AMPS 1 is normalled
to OUT A of AMPS 2; IN B of AMPS 1 is
normalled to IN A of AMPS 2; and
CV B IN of AMPS 1 is normalled to
CV A IN of AMPS 2.
2. You can add a third AMPS module to the end of the
2-module chain to create a 6-channel mono mixer, etc.
With three AMPS modules chained together, it works
exactly as if it were a 6-channel, 18 hp version of the
module.
Amps Manual 10