Installation Dryflow® Bi-Tap Soap & Water Sensor Tap Read ALL the instructions completely before installation
Specifications Trouble shooting Model No. IFSGAJ002A-ANON Description Automatic faucet with soap dispenser Power Suplly DC:6V(4AA alkaline batteries） AC：220V-240V；50/60Hz Symptom No water out Static Power Consumption DC:≤0.18-0.33mW Sensing Range Sensing for water：25±5CM (based on white board) Sensing for soap：10±2CM (based on white board) Water Pressure 0.
Debugging step for soap dispenser Part name 1、Fill the bottle full of liquid soap for the first time； 2、Press and hold the dispense button on the control box, release till the soap is dispensed. 3、Start the system by passing your hand in the sensor range, soap will dispense automatically. Note: It has four soap dispense volume adjustment: 1. Low volume 2. Normal volume 3. Medium volume 4. High volume Soap nozzle Aerator Water sensing Soap sensing Faucet body Basin Max.40mm Nut M26*1.
Installation Installation Warning :Before installing the new spout it is essential that you throughly flush through the pipework in order to remove any remaining swarf,solder etc. Failure to carry out this procedure could cause problems or damage to the workings of the spout. This product must not be modified in any way as this will invalidate the guarantee . OUT OUT IN IN 1. Screw off the rotary union,nut and gasket from the faucet. 3.
