User's Manual
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Management Guide for Windows XP User
- Chapter 3 Management Guide for Vista User
- Chapter 4 Introduction for Windows 7 User
- Appendix A: Specifications
- Appendix B: Glossary
USB 11n Wireless Adapter
- 32 -
SSID: AP name of user type.
Channel: Manually force the AP using the channel. System default is channel 1.
Security Setting: Authentication mode and encryption algorithm used within the AP. System
default is no authentication and encryption.
Cancel: Cancel the above changes.
OK: Apply the above changes.
Network Authentication: Select the Security tab in the screen above. To define the security mode,
select the desired security mode as follows. There are 4 types supported: Open System, Shared
Key, WPA-PSK, WPA2-PSK. Please select a type from the drop down list.
Data Encryption:
Data encryption
There are 4 types supported: Disabled, WEP, TKIP and AES. The
available encryption selection will differ from the authentication type you
have chosen, the result is shown below:
Authentication
Available Encryption Selection
Open System
Disabled, WEP
Shared Key
WEP
WPA-PSK,
TKIP, AES