User's Manual

IS-TWL-CAPTURE Setup
TWL-06-0044-001-D 4  2008-2009 Nintendo
Released: March 17, 2009 CONFIDENTIAL
1 Using This Product Safely
To use IS-TWL-CAPTURE safely and ensure the unit does not malfunction and possibly cause a safety
hazard, please read the following items carefully.
• Do not modify the unit or take it apart.
• If you notice a problem, immediately stop using the unit.
• Do not allow liquids or foreign objects to enter the unit.
• Do not store the unit in a humid or dusty location.
• Never cover the unit or block ventilation.
• Do not bend, pull, or twist the cables.
• Do not subject the unit to strong impact.
• Do not use the unit in locations where the temperature is below 0°C or above 40°C.
• Do not use the unit during an electrical storm.
Regulatory Statement
• This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
• This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
• Operation of this equipment in a residential area is likely to cause harmful interference, in which case
users will be required to correct the interference at their own expense.
• This equipment complies with FCC radiation exposure limits for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20 cm between the radio
frequency energy radiator and body. This transmitter must not be co-located or operating in conjunction
with any antenna or transmitter.
• This device has been designed to operate with the antennas listed below, and having a maximum gain
of 2dB. Antennas not included in this list or having a gain greater than 2dB are strictly prohibited for use
with this device. The required antenna impedance is 50 ohms.
• To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful
communication.