Manualshelf

Setup Manual

ManualsBrandsINTELLIGENT SYSTEMS ManualsElectronicsGame Development Tool
12345678910
IS-CTR-BOX Set-up Manual
CONFIDENTIAL
Version 0.0.2
7
Installing the IS-CTR-BOX screw type stand
Follow the instructions below to installing the IS-CTR-BOX screw type stand
1. Attach the stand to the bottom of
the IS-CTR-BOX.
Attach the Ferrite Core
Follow the instructions below to attach the Ferrite Core
2. Attach a ferrite core to the USB
cable.
Two loops the cable approximately
5 cm from the USB-B connector
and sandwich the portion of the
cable that is overlapped with the
ferrite core (see the figure at right).
3. Attach a ferrite core to the AC
adapter cable.
Loop the cable approximately 5 cm
from the DC connector and
sandwich the portion of the cable
that is overlapped with the ferrite
core (see the figure at right).