Datasheet

Appendix B- Operational Notes
40
Appendix B:
Operational Notes
FIRMWARE UPGRADE
The SuperDrive Lock’s firmware can be upgraded by connecting the SDL to the PC
using the SDL’s USB interface located on the back of the unit. Detailed Firmware
Upgrade instructions and files can be downloaded from the ICS Web Site
(www.ics-iq.com).
SDL USB Firmware Upgrade
Figure 26
DRIVE JUMPER SETTINGS
The following are common SCSI jumper settings required for proper operation:
• Enable “Auto Spin”.
• It is recommended to set the “SCSI Address” to 0.
Dual eSATA and
USB Interface
Connector
USB Cable