Datasheet

Chapter 3 – Installation
23
d. Connect the SDL’s eSATA connector, located on the back of the unit, to the
S-ATA-to-USB Adapter’s S-ATA connector, using the supplied
eSATA-to-S-ATA interface cable (Fig. 11 and 17).
S-ATA-to-USB Adapter
Figure 18
e. Connect the S-ATA-to-USB adapter’s USB connector to the Notebook or PC’s
USB interface.
f. Verify that the Super DriveLock’s External power supply is disconnected from
the AC power outlet.
g. Connect the Super DriveLock’s External power supply to the SDL’s Power
Connector, located on the back of the unit.
h. Connect the Super DriveLock’s External power supply to the AC power outlet.
S-ATA Connector
USB Connector