Datasheet

Chapter 3 – Installation
21
b. Load the appropriate eSATA ExpressCard or eS-ATA CardBus Adapter
drivers.
NOTE: Refer to the card manufacturer’s instructions for appropriate driver
installation instructions.
c. Connect the SDL’s eSATA connector, located on the back of the unit, to the
Notebook’s External eSATA interface, using the supplied eSATA-to-eSATA
interface cable.
d. Verify that the Super DriveLock’s External power supply is disconnected
from the AC power outlet.
e. Connect the Super DriveLock’s External power supply to the SDL’s Power
Connector, located on the back of the unit.
f. Connect the Super DriveLock’s External power supply to the AC power outlet.