Datasheet

Chapter 3 – Installation
14
d. Connect a PC’s available power supply cable to the SDL’s Power Connector,
located on the back of the unit.
Figure 6
c. Connect the SDL’s eSATA connector, located on the back of the unit, to the
PC’s internal native SATA interface using the supplied eSATA-to-S-ATA
interface cable.
Figure 7
e. Verify that the PC’s native S-ATA interface used to connect to the SDL unit is
enabled in the PC’s BIOS.
f. Close PC’s cover.
eSATA Interface
Connector
Power-In
Connector
PC Internal S-ATA
Ports