Quick Start Guide
ManualsBrandsIntelligent Automation ManualsComputers & AccessoriesARGUS Guardian is a fence-mounted, RF-based perimeter intrusion detection system. This system uses a network of unattended wireless sensors to create a wireless trip wire along a perimeter to provide early warnings against intrusions.
Page | 8
© 2018 Intelligent Automation, Inc.
3.2 Node Description
The ARGUS GUARDIAN node is a small, rugged device intended for long-term unattended outdoor use. It
is solar cell powered with a backup battery.The Guardian is intended to be fence mounted. The node’s
interface is intentionally very simple (see Figure 7).
Figure 7: Front side of the ARGUS GUARDIAN node
The node interface includes:
- .
- Tripod Mount – Each node includes a standard ¼”-20 threaded insert in the bottom for
mounting the node. See Section 3.3 for details on mounting methods.
- Battery Door – The bottom of the node includes a battery door with a tamper-proof hex nut for
accessing the battery. See Section 3.4 for details on battery replacement.
3.3 Node Mounts
The ARGUS GUARDIAN nodes include a custom metal bracket, so they will mount on Ameristar fences.
3.4 Battery Replacement
Each ARGUS GUARDIAN Node uses 1x UB4.5-4k universal battery. To change the battery, simply remove
the battery cover on the bottom of the unit by rotating the fastener 90 degrees counter-clockwise.