Quick Start Guide
ManualsBrandsIntelligent Automation ManualsComputers & AccessoriesARGUS Guardian is a fence-mounted, RF-based perimeter intrusion detection system. This system uses a network of unattended wireless sensors to create a wireless trip wire along a perimeter to provide early warnings against intrusions.
Page | 6
© 2018 Intelligent Automation, Inc.
Figure 5: Map view of three node configuration with one Active link (yellow line) and two Inactive links (blue dotted lines)
Step 8: ‘Commit’ the configuration
Press the ‘Commit’ button in the lower left corner of the Map View to save the ARGUS GUARDIAN
configuration and place the system into Active Mode. The system will now be continuously monitoring
and logging any fence link triggers, displaying alerts both within the Map View and in the Alerts panel on
the right side of the GUI. See sample screenshot in Figure 6, and refer to Section 4.8 for more details
regarding the alerts.
Figure 6: ARGUS GUARDIAN GUI in Active Mode. Alerts are shown in the right panel; Alert History is shown in the bottom
panel, and current status is shown in the center Map View.