Quick Start Guide
ManualsBrandsIntelligent Automation ManualsComputers & AccessoriesARGUS Guardian is a fence-mounted, RF-based perimeter intrusion detection system. This system uses a network of unattended wireless sensors to create a wireless trip wire along a perimeter to provide early warnings against intrusions.
Page | 4
© 2018 Intelligent Automation, Inc.
- Specify a configuration description (optional) and select a Map Type: None, Satellite, or User
Defined (see Section 4.3 for descriptions). Click ‘Next’.
- Click ‘Next’ to leave Camera Monitoring disabled (see Section 4.9.1 for details).
- Click ‘Finish’ to leave SMS/MMS Notifications disabled (see Section 4.9.2 for details).
- The new configuration has been created, and you are now in Configuration Mode. The main GUI
should again be displayed (see Figure 3).
Figure 3: Initial Configuration Mode view (with satellite map type selected)
Step 5: Turn on fence nodes
Attach antennas to and turn on at least two ARGUS GUARDIAN fence nodes. They will automatically
register with the system and appear in the ‘Node Manager’ list on the left side of the screen. The nodes
will appear on the screen with the identification number corresponding to the node ID number on the
back of each ARGUS GUARDIAN unit. See Section 4.2.2 for detailed descriptions of the icons that are
shown in the Node Manager.