Quick Start Guide
ManualsBrandsIntelligent Automation ManualsComputers & AccessoriesARGUS Guardian is a fence-mounted, RF-based perimeter intrusion detection system. This system uses a network of unattended wireless sensors to create a wireless trip wire along a perimeter to provide early warnings against intrusions.
Page | 23
© 2018 Intelligent Automation, Inc.
Figure 26: Camera Monitoring Configuration Window
2) Configuring cameras for use in the ARGUS GUARDIAN system
a. Camera nodes will appear in the Node Manager view on the left. Camera nodes can be
positioned, just like ARGUS GUARDIAN nodes, by dragging from the Node Manager view
to their desired location on the Map Editor.
b. After the ARGUS GUARDIAN deployment has been configured, click a link in the Map
Editor that should be mapped to a particular camera. This will bring up the Link
Configuration dialog.
c. With the Link Configuration dialog, check the option Trigger Camera on Alert. By default
the option is displayed. When checked, the ARGUS GUARDIAN system will automatically
display the video feed from the selected camera.
Figure 27: Link Configuration Dialog with Camera Plug-in
4.9.2 Text Message Plug-in
The Text Message Plug-in allows ARGUS GUARDIAN operators to forward alerts to mobile phone via Text
or Multimedia Messages. This is fully configurable within the Configuration Wizard. Note that an active
Internet connection is required for this feature to operate.