Quick Start Guide
ManualsBrandsIntelligent Automation ManualsComputers & AccessoriesARGUS Guardian is a fence-mounted, RF-based perimeter intrusion detection system. This system uses a network of unattended wireless sensors to create a wireless trip wire along a perimeter to provide early warnings against intrusions.
Page | 19
© 2018 Intelligent Automation, Inc.
Figure 21: A set of links configured with Line Mode from the toolbar
Perimeter Mode 4.6.2.4
Perimeter Mode enables the user to rapidly activate an entire sequence of links that are in a roughly
circular configuration. This mode is enabled by clicking the lower left button in the Link Configuration
Toolbar, and remains active only until the set of nodes has been selected. After clicking the Perimeter
Mode icon, the user can click and drag to box-select a set of nodes for which to configure as a
perimeter. Once the nodes have been selected, the software will attempt to automatically configure the
set of nodes in a roughly circular topology. See Figure 22 for an example of the Perimeter Mode tool in
operation.
Note that this tool can be used to select all nodes in the configuration, or just a subset of the nodes.
Also, the tool will not modify links that are to/from nodes outside of the set of selected nodes. Thus, this
tool can be used to configure a part of the deployment that happens to be a perimeter, and then use the
other methods to configure other links as desired.
Figure 22: A set of links configured with Perimeter Mode from the toolbar