Quick Start Guide
ManualsBrandsIntelligent Automation ManualsComputers & AccessoriesARGUS Guardian is a fence-mounted, RF-based perimeter intrusion detection system. This system uses a network of unattended wireless sensors to create a wireless trip wire along a perimeter to provide early warnings against intrusions.
Page | 11
© 2018 Intelligent Automation, Inc.
4.2 User Interface Overview
Upon starting the ARGUS GUARDIAN software, the user will be presented with the main Graphical User
Interface (see Figure 9). This section presents an overview of the interface before diving into the
operational details in subsequent sections.
Figure 9: Main Graphical User Interface (GUI) layout
4.2.1 Main Toolbar
The main toolbar is located at the top left corner of the GUI. The toolbar includes five buttons:
- Configure – Launch the Configuration Wizard (see Section 4.3)
- Mute – Enable/disable the audible alarm when an alert is received from the ARGUS GUARDIAN
hardware
- Tools – Enter the admin utility (not described in this manual)
- Exit – Close the ARGUS GUARDIAN View software
Figure 10: Main Toolbar
4.2.2 GUI Panels
The GUI consists of several panels with various functions:
- Node Manager Panel – This panel includes a list of ARGUS GUARDIAN nodes and their status
(see Figure 11). Each row in the list indicates the state of one node in the system, including
battery status and GPS status.