Quick Start Guide

7
Pool Volume Press Select to enter Pool Volume menu.
Press Down arrow to scroll to Pool Volume.
Enter pool volume of water in m
3
. The setting is from 4 - 3785 m
3
. Enter volume as accurately as
possible, as IntelliFlo VF uses this information to maximize operational ef ciency.
Press
Select to highlight value.
Press Left and Right arrow to select digit to modify.
Press Up/Down arrow to change a value.
When value is set, press Enter to con rm value and save changes.
Water Temperature Press Down arrow to scroll to Water Temperature menu.
Measure pool water temperature. Strict temperature accuracy is not critical since the water
temperature value is used only to enhance the accuracy of the  ow sensor, however a close
estimate is desirable.
Press
Select to highlight value (20°C to 40°C).
Press Left and Right arrow to select digit to modify.
Enter water temperature – Press
Up/Down arrow to change a value.
When value is set, press Enter to con rm value and save changes.
Pool Data
Pool Volume
12:15
117.
117.m3
®
Pool Data
Water Temperature
12:15
24 °C
®