Quick Start Guide

12
Features Menu Press Down arrow to scroll to Features menu
(Features are found in the Time/Cont menu).
Features 1 and 2 allow manual operation of assigned water features with a range of 0-600 minutes
countdown each. For example, Feature 1 can be assigned to Spa operation, and Feature 2 to the
Automatic Cleaner. Features 1 and 2 need to be programmed for Flow and Duration. They are
manually activated by pressing the Feature Button, and then Start/Stop. The Feature’s LED light will
come on, and the screen will start to subtract time in minutes from your programmed duration time.
You can also scroll with the buttons to monitor power, speed, or  ow.
Set Flow Press Select to access Feature 1 or Feature 2 Set Flow.
Press Left arrow and Right arrow to select digit to modify.
Change values by pressing Up arrow and Down arrow.
When value is set, press
Enter to con rm value and save changes.
Time Duration Press Select to access Feature 1 or Feature 2 Duration.
Change values by pressing Up arrow and Down arrow.
When value is set, press Enter to con rm value and save changes.