Owner's Manual

15
Heat & Glo • PRIMO48, PRIMO48ST, PRIMO60, PRIMO60ST, PRIMO72, PRIMO72ST Owner’s Manual • 9/20
Figure 3.6 LED Color Combinations
LED Switch Operation
Three white toggle switches are used to operate the ex-
terior lighting control for the fi replace. There are seven
color options. See Figure 3.6. Flipping a combination
of these three buttons activates the desired color. The
chart in Figure 3.6 shows the combinations for each of
the seven colors.
OUT IN


OUT IN
Black
Wire
Green
Wire
Orange
Wire
Yellow
Wire
LED Color Switches
LED Lighting
WARNING! Risk of Shock! Label all wires prior to
disconnection when servicing controls. Wiring errors can
cause improper and dangerous operation. Verify proper
operation after servicing.
WARNING! Risk of Shock! Replace damaged wire with
type 105° C rated wire. Wire must have high temperature
insulation.
The functions and colors for the LED lighting on the
PRIMO appliance are controlled by the included wall
switch.
COLOR
TOP
SWITCH
MIDDLE
SWITCH
BOTTOM
SWITCH
OFF IN IN IN
DARK BLUE OUT IN IN
GREEN IN OUT IN
RED IN IN OUT
WHITE OUT OUT OUT
LIGHT
BLUE
OUT OUT IN
YELLOW IN OUT OUT
PURPLE OUT IN OUT