Users Manual Part 3

61
Using AptusLX
No. Item Description
1
Data Sets the data settings.
2
Routing Cong
Selects the data route type (None, Satellite Only, WAN Only).
Click the Apply button to apply the settings to the system.
3
Port/Protocol
Forwarding
Displays the port/protocol forwarding list.
• Plus icon:
To create new ports , click the plus icon . Then the pop-up window is
opened. Enter the details, then click the Update button. The created ports are
displayed on the list.
- Enable: Select the check box.
- Internal IP: Enter the internal IP.
- Link: Select the link from the drop-down list.
- Specier: Select the specier from the drop-down list.
- Protocol: Select the protocol from the drop-down list.
- Internal Port: Enter the internal port.
- External Port:Enter the external port.
8.7.5 Data
1
2
3