Users Manual Part 2

59
Using AptusLX
No. Item Description
1
Firewall
Sets the rewall, network security system, which monitors and controls incoming
and outgoing network trafc based on predetermined security rules.
2
Firewall Cong
Sets the rewall conguration.
• Activate: sets the rewall function by toggling the activation button (Enable/
Disable).
• Inbound Default Action: select the default settings for the incoming network
from the drop-down list (Accept/Drop).
• Outbound Default Action: select the default settings for the outgoing network
from the drop-down list (Accept/Drop).
Click the Apply button to apply the settings to the system.
3
Firewall Rules
Displays rewall rule lists.
• Plus icon: To create new rewall rules, click the plus icon. Then the pop-up
window is opened. Click the Update button. The created rewall rules are
displayed on the list.
- Enable: Select the checkbox to use the rewall rule.
- Link: Select the link from the drop-down list.
- Source: Enter the source.
- Source Mask: Enter the source mask.
- Source Port Start: Enter the source mask start.
- Source Port End: Enter the source mask end.
- Protocol: Select the protocol from the drop-down list.
- Specier: Select the Specier from the drop-down list.
- Destination: Enter the destination.
- Destination Mask: Enter the destination mask.
- Destination Port Start: Enter the destination mask start.
- Destination Port End: Enter the destination mask end.
- Action: Select the action from the drop-down list.
- Direction: You can assign the new rule entered above to the Inbound
(Inbound Default Action) or the Outbound (Outbound Default Action) in
the Direction menu.
8.7.3 Firewall
1
2
3