Users Manual Part 1

28
FB250 - Marine Satellite Communication System
2.
A
The position between end of legs of the pole bracket must be aligned with the BOW direction. Place
the pole bracket onto the pole tube then tighten them using bolts. Before assembling bolts, apply Loctite
#263 to the bolt's threads to ensure the bolts are fastened rmly.
Figure 14: Installing Pole Bracket
3. Check the position of
A
the antenna's cable connector and BOW direction. Place the antenna on the
pole-mounted bracket then tighten them using bolts. Before assembling bolts, apply Loctite #263 to the
bolt's threads to ensure the bolts are fastened rmly.
Figure 13: Mounting Antenna on Pole Mounted Bracket
x Four Times
Pole Bracket
Pole Tube
Use a torque wrench.
BOW
A
M6 x 20L Hex. Bolt
M6 Spring Washer
M6 Flat Washer
BOW
x Four Times
Use a torque wrench.
A
M6 x 25L Hex. Bolt
M6 Spring Washer
M6 Flat Washer