Owner manual

DIGI-P52 Installaon Guide
18
Front Panel and IR Remote Operaon
Source Selecon
Output Resoluon Selecon
Auto Selecon:
Press and hold the Source/Auto buon for 15 seconds to enable
the Auto Switching mode of the DIGI-P52. This funcon will not
be available if either of the VGA ports are set to an alternate
analog video format.
Manual Selecon:
Press the Source/Auto buon to select the desired input.
Auto Selecon:
Press and hold the Resoluon/Auto buon for 15 seconds
to enable the DIGI-P52 to scale the output resoluon to the
preferred sengs of the display.
Manual Selecon:
Press the Resoluon/Auto buon to cycle through the preset
video output resoluons.
Scaler Switcher
INPUT SOURCE
CEC CONTROL
INPUT 1 INPUT 2 INPUT 3
P.M. ZOOM
S.M.
MENU
EXIT
1080P 720P
AUTO
REV
FWD
PLAY/
PAUSE
STOP
MENU
INPUT 4 INPUT 5 AUTO
MIC MUTE
LINE MUTE
MIC
LINE
OK
Scaler Switcher
INPUT SOURCE
CEC CONTROL
INPUT 1 INPUT 2 INPUT 3
P.M. ZOOM
S.M.
MENU
EXIT
1080P 720P
AUTO
REV
FWD
PLAY/
PAUSE
STOP
MENU
INPUT 4 INPUT 5 AUTO
MIC MUTE
LINE MUTE
MIC
LINE
OK
The included IR remote features discrete input selecon
buons. The Auto buon on the IR remote will cycle between
Auto and Manual operaon.
The IR remote features discrete output resoluons for 720p and
1080p. The Auto buon on the IR remote will scale the output
resoluon to the preferred sengs of the display.