Owner manual

DIGI-P52 Installaon Guide

Connect Microphone Input (Oponal)

Connect Audio Output (Oponal)

Insert the removable 3-pole terminal block to the MIC

input terminal.

If the analog audio output is to be used in the installaon,

connect the Le, Right, and ground reference wires to the

removable 3-pole terminal block.

Set the MIC switch to the proper seng for the microphone

input source.

48V 48V phantom power

MIC No phantom power

LINE No gain needed

Insert the removable 3-pole terminal block to the output

zone terminal.

L+

L-

R-

R+