Owner manual

DIGI-P52 Installaon Guide
11
Installaon Instrucons
Quick Start
Mount the Matrix
Shelf Mounng Instrucons
Table Mounng Instrucons
1. Mount the matrix
2. Connect sources
3. Connect audio inputs (oponal)
4. Connect displays
5. Connect microphone input (oponal)
6. Connect audio output (oponal)
7. Connect control (oponal)
8. Apply power
At least 2 inches of free air space is required on both sides of the DIGI-P52 for proper side venlaon. Avoid
mounng the DIGI-P52 near a power amplier or any other source of signicant heat.
Aach the supplied shelf feet to the boom of the DIGI-P52.
Aach the supplied mounng rails to the sides of the DIGI-P52.
Once the rails are installed, the scaler is ready to be mounted
under a table.