User Manual

DIGI-44B Installation Guide

Front Panel

1 - IR Receiver – For use with the included IR remote.

2 - Input Buttons –Buttons labeled “1-2” and “3-4”.

3 - Preset Buttons (Top Row) –Buttons labeled “CLEAR” and “TAKE”.

CLEAR – Used to cancel the current input selection.

TAKE – Used to make the changes active.

4 - Power Switch –Switch to toggle the power to the matrix.

5 - Rack Ears – Optional rack ears for rack mounting the DIGI-44B in an equipment rack.

6 - Chassis Feet –Factory installed feet for shelf top installations.

7 - LED Display – Routing information is displayed.

8 - Output Buttons – Buttons labeled “1-2” and “3-4”.

9 - Preset Buttons (Bottom Row) –Buttons labeled “STORE” and “RECALL”.

STORE – Used to save a preset to memory.

RECALL – Used to load a preset from memory.

Explanation of use for the front panel control is located in the section Front Panel and IR Remote Operation

(page 10).