User's Manual

Intelibs, Inc Proprietary and Confidential Page 37
37
The menu panel contains following menu functions:
• Home: Introductions of Intelibs, Inc, and brief introduction of GUI usage.
• DAS systems: Hierarchical view of registered DAS systems.
• Alarm history: Alarm log of all registered DAS systems.
• Alarms: Current alarms of all registered DAS systems.
• SNMP settings: SNMP environment settings such as trap IP, community, V3 user, etc.
• Site settings: Assign site and location information to each registered Das systems.
• User settings: Add/delete web user and change user’s password
• Support: Intelibs’ support information.
• About us: Redirect to Intelibs’ web page.
• Log Off: Logging off current user’s session.
Before using web interface, followings should be assigned and set correctly:
• Master Unit’s IP address
• MHU system’s IP address
• Master Unit’s IP address on MHU system
Figure 4-4 shows web interface flow over IP network.
Figure 4-4 Web interface flow
If IP network connection is established successfully, then parameters of RU can be set by Web browser,
and all status information can be reported to Web browser.
Following is one example of Web operation which sets the upper limit of RU chassis’ temperature.