User's Manual

Intelibs, Inc Proprietary and Confidential Page 35
35
4.2 Example: Setting the Temperature Upper Limit
Following is one example of LMT operation which sets the upper limit of RU chassis’ temperature.
• At “Repeater Browser” window, click the DAS system to be managed, then the selected DAS
system’s control window will pop up.
Step 1
• Click the temperature upper limit box which is on the right side of “TMPUPR”. A number in the
box represents current upper limit of chassis’ temperature.
• Select TMPUPR value by clicking up/down button or enter temperature upper limit. Then click
“Set” button.
Step 2
• The result of operation displays at the bottom of the window.