User's Manual
Table Of Contents
Intelibs, Inc Proprietary and Confidential Page 26
26
3.8.2 Up Link power setting
• Follow same steps as Downlink power setting.
Step 1 – Step 2
• Run LMT application as the procedure described in 2.8.1.1.
Step 3
• Adjust parameters as follows:
① Use the “ATT” to control Uplink gain.
② Uplink gain is very important parameter because uplink is connected to RF source of BTS. If
you have wrong uplink gain set, BTS receiver sensitivity may be degraded due to improper
uplink gain.
③ Try to minimize uplink gain with mobile Tx power.
❶
❷
❸