User's Manual
Table Of Contents
Intelibs, Inc Proprietary and Confidential Page 25
25
• Connect USB cable to manage RU through Laptop.
Step 2
• Run LMT application as the procedure described in 2.8.1.1.
Step 3
• Adjust parameters as follows:
① Decrease the DL “USER ATT” to 30dB(Minimum gain) and verify that antenna is connected at
antenna port of RU properly.
② Press the “HPA On/Off” button to turn HPA on.
③ Monitor the output power level from “ OUT PWR” parameter, and tune up “USR ATT” to set
the proper output power level.