User's Manual
Table Of Contents
Intelibs, Inc Proprietary and Confidential Page 24
24
Figure 3-9 OSP hardened SC/APC optic cable
Connect ruggedized OSP side optic connector to the desired optic port on RU, “OPTIC-A” as Figure below.
When connecting the optic connector, align the connector at latch position, then plug in and rotate
clockwise tightly.
Figure 3-10 Optic cable connection
3.8 RF power setting
3.8.1 Down Link power setting
• Connect the power cable to RU to turn on the system.
Step 1