User's Manual

Intelibs, Inc Proprietary and Confidential Page 12
12
RRBS1_AWS
Amplifies RX1 signal by low noise high gain amplifier, filters for desired
band frequencies, and controls uplink path gain.
HPA_AWS
for MIMO0
Amplifies TX0 signal by 16W (42dBm) high power amplifier, and sends
amplified signal to FE_DUPLEXER_AWS MIMO0 module.
HPA_AWS
for MIMO1
Amplifies TX1 signal by 16W (42dBm) high power amplifier, and sends
amplified signal to FE_DUPLEXER_AWS MIMO1 module.
FE_DUPLEXER_AWS
for MIMO0
Front-end duplex that passes TX0 and RX0 frequencies bands.
FE_DUPLEXER_AWS
for MIMO1
Front-end duplex that passes TX1 and RX1 frequencies bands.
PSU
Converts AC 110V to DC 29V/9V/6.5V/5.5V, and supplies DC converted
voltages to entire modules.
NMS Controller
Monitors status of modules in RU, and controls the configurable
parameters of the RU modules.
Interface BD
Provides interface between NMS and other modules to control and
monitor the modules.
2.4 Mechanical Drawing
Figure 2-5 RF modules