User's Manual

Intelibs, Inc. Proprietary and Confidential Page 22
22
[Laptop connection to MRU]
Figure 4-3 USB connection
If the USB connection has been established, LMT is ready to start. Click the short cut icon on your laptop
and follows the steps below.
Step 1
Run the IDAS GUI.
Step 2
Select the connection parameters as follows:
- Choose [File connect] from GUI window
- Repeater Types: IDAS
- Connected Device: choose one of RHU-Master, SRU, MRU or FHU
- Connections
o Serial Port: The port number established via USB