User's Manual

Intelibs, Inc. Proprietary and Confidential Page 19
19
 Locate the equipment with the space for the sufficient airflow to prevent build-up from
the overheating. Do not compromise the amount of airflow required for safe operation of
the equipment.
 Verify the power connection and Fiber cables prior to turning on the systems.
WARNING: Equipment loading must be verified prior to mounting the equipment on the wall or 19”
rack.
3.1.1 General Safety Precautions
The following precautions apply to the RHU:
 The units have no user-serviceable parts. Faulty or failed units are fully replaceable through
Intelibs.
 When the Fiber cable is connected to the equipment, the connectors must be free from the dust
and connected according to the cable manufacturer’s instructions. (WARNING: For the safety,
DO NOT conduct eye-contact at the connector ends of the fibers or the port of the RHU and SRU
unless equipped with protection goggle. Invisible infrared radiation may be present at the front
panel of the RHU and SRU. Do not remove the fiber port dust caps unless the port is going to be
used. Do not stare directly into a fiber port.)