User's Manual
Intelibs, Inc. Proprietary and Confidential Page 36
36
User Connect: Connection status between Laptop and
RHU
PWR Alarm: DC power alarm
Temp: Current temperature of unit inside
Upper Temp: set the upper threshold value of
temperature (Value) and alarm status (LED)
Band screen selection TAB.
Path ON/OFF: DL Path ON/OFF function
PLL: PLL lock alarm indicator
IN PWR: DL input power value
OUT PWR: DL Output power value
IN UPR: DL input upper limit value and alarm
IN LWR: DL input lower limit value and alarm
ATT 1 & 2: DL Attenuation value for the DL gain control
ALC: Auto level limit control value and on/off set
AGC : Auto gain control level and on/off set
TC ATT: Temperature compensation Attenuation and
On/Off button
Path ON/OFF: UL Path ON/OFF function
PLL: PLL lock alarm indicator
IN PWR: UL input power value
OUT PWR: UL Output power value
IN UPR: UL input upper limit value and alarm
IN LWR: UL input lower limit value and alarm
ATT 1 & 2: UL Attenuation value for the UL gain control
ALC: Auto level limit control value and on/off set
AGC : Auto gain control level and on/off set
Shutdown: Auto shutdown level value set
TC ATT: Temperature compensation Attenuation and
On/Off button
Filter Enable: Digital filter Enable set
PLL: FPGA PLL lock alarm
Module ID: Digital filter ID information of FPGA.
FPGA Ver: FPGA SW version
Isolation: Isolation margin between two antennas
IGC LVL: Isolation gain control target margin level set
and IGC protection function On / Off
IGC ATT: applied attenuation value by IGC function
IGC Delay: Delay set for IGC function
Filter Info: Digital filter setting information
IGC MODE: IGC control Tx only or Tx/Rx simultaneously