User's Manual
Table Of Contents
- 1 Introduction
- 2 Product Description
- 3 Appendix I. Ancillary Devices – Antenna, Cable and other Passive Device
- 4 Human RF Exposure – Maximum Permissible Exposure Evaluation
Intelibs, Inc Proprietary and Confidential Page 28
28
2.7.1.2 Setting the Temperature Upper Limit
Following is one example of LMT operation which sets the upper limit of SRU chassis’ temperature.
Step 1
• At “Repeater Browser” window, click the DAS system to be managed, then the selected DAS
system’s control window will pop up.
• Click the temperature upper limit box which is on the right side of “TMPUPR”. A number in the
box represents current upper limit of chassis’ temperature.
Step 2
• Select TMPUPR value by clicking up/down button or enter temperature upper limit. Then click
“Set” button.
• The result of operation displays at the bottom of the window.
• Click close button on the upper right corner of the window to exit the command window.