User's Manual

Intelibs, Inc Proprietary and Confidential Page 26
26
- Serial Number
Time/UpTime Current time or Up-time
User Connect √ Connection status with the DAS
PSU
√
Status of Power Supply Unit
TMPCUR Current chassis temperature of the DAS system
TMPUPR √ √
Set temperature upper limit, and display its value
and alarm status.
LDPWR
√
Current output power of LD (Laser Diode) of optic
module connected to SRU.
LDLWR √ √
Set the lower limit of output power of LD, and
display its value and alarm status.
PDPWR √
Current input power of PD (Photo Detector) of
optic module connected to SRU.
PDLWR √ √
Set the lower limit of input power of PD, and
display its value and alarm status.
Table 2-12 Tx-PCS/Cellular
Status group Parameters
LED
Clickable Description
PCS Band
Selects PCS channel
Cellular Band Selects Cellular channel
Path Use √
√
Turning On/Off of usage of the channel, and
display its status
TOTATT
Downlink total attenuation value
USR ATT
√
Set user configurable downlink attenuation value
ALC ATT
Downlink ALC (Automatic Level Control)
attenuation value
IN PWR Downlink input power from RHU or FHU
TC ATT √
Displays downlink temperature compensation
attenuation value, and enable/disable downlink
temperature compensation.
HPA On/Off √ √ Enable/disable downlink HPA (High Power Amp).
OUT PWR Downlink output power
OUT UPR √ √
Set upper limit of downlink output power, and
displays its value and alarm status
OUT LWR √ √
Set lower limit of downlink output power, and
displays its value and alarm status
ALC √ √
Set ALC (Automatic Level Control) function’s
activation level, and enable/disable ALC.
ASD √ √
Set ASD (Automatic Shut Down) function’s
activation level, and enable/disable ASD.
Table 2-13 Rx-PCS/Cellular
Status group Parameters LED Clickable Description
Protection
On/Off
√
√ Enable/disable uplink Protection function.
IN PWR
Uplink input power